Description
Intended for operation on AC voltage only. The model 4610 series is
a true repeat cycle timer,
not an ON-OFF cycle timer. Once the Repeat Cycle Time has been set, any variation of the
Energize Time will not affect the Repeat Cycle Time. The 4610 series was developed
to
emulate the older electromechanical synchronous motor type of repeat cycle timer. The
switching action of the electromechanical timer has been replaced by a solid state switch
energizing on each repeat cycle. This portion of the cycle is referred to as the Energize
Time.
Specifications
| Operating Voltage |
24, 48, 115V AC 50/60 Hz. |
| Output Rating |
50 milliamperes to 5 amperes inductive. With additional
heatsinking, the model 4610 can operate to 10 amperes. |
| Timing Mode |
Repeat Cycle Timer. |
| Timing Range |
Fixed or Adjustable. Fixed times from .2 to 86,400 seconds,
energize times to 90%. |
4610 Specifications , click to view, right
click - Save As ... to download
Ordering Information
| Model |
Voltage |
RC Time |
RC Tol. |
Ener. Time |
Ener. Tol. |
Range |
| 4610A |
-4 24VAC
-5 48VAC
-6 115VAC
-7 230VAC |
-1 0.2-60
-2 2-600
-3 4-2000
-4 20-9000
-5 60-16000 |
N/A |
-1 0.1-30
-2 1-300
-3 2-1000
-4 10-4500
-5 30-8000 |
N/A |
-A Energize time < 50% Cycle Time -B Energize time > 50% Cycle Time |
| 4610F |
Specify in seconds |
-A 2%
-B 5%
-C 10%
-D 20% |
Specify in seconds |
-A 2%
-B 5%
-C 10%
-D 20% |
N/A |
Examples
| Model Number |
Description |
| 4610A-6-2-A |
Operates from 115VAC, Repeat Cycle time
adjustable from 2-600 seconds, Energize time adjustable from 1-300 seconds up to a
maximum of 50% of the Repeat Cycle time ! |
| 4610A-6-2-B |
Same as above, except that the Energize time is
adjustable from 50% of the Repeat Cycle time to 90% of the RC Time. The Energize
time resistor or potentiometer adds 1-300 seconds to 50% of the RC Time. |
| 4610F-7-10-C-1-C |
Operates from 230VAC, Repeat Cycle time fixed at
10 seconds +/- 10%, Energize time fixed at 1 seconds +/-10% |
|
