Timer Operating Modes
This
page explains the different timer operating modes with
links to a listing of the various timers Artisan manufactures for each
different timing mode. You can also download the PDF file below which
explains each timing mode with timing diagrams and provides a comparison
between solid state and relay contact outputs
Timer Modes
Application Diagrams
Various applications for our
timer products:
4300 - Single Shot
- How to use a 4300 interval timer as a single shot.
Alternator
- How to provide alternate pulsing of two loads.
DOM-Interval
- How to create an ON delay and OFF delay.
Interval with
Flasher
- How to flash a load for a specific period of time
Multi Output Cycling -
How to cycle multiple loads on a continuous basis
Plug-In Wiring - Typical wiring of
our plug-in series of timers
PP-1426 Octal Socket -
Dimensional drawing of our PP-1426 socket for plug-in timers
SS with OFF Dwell -
Single shot timer with controlled minimum off time
Programming Manuals (new)
4950 Handbook - Manual for programming our
4950, 4950PM, 4950PC, and 4950H controllers.
4950B Handbook - Manual for programming the
4950B Bell controller.
4950PMB Handbook - Manual for programming
our 4950PMB Bell controller.
5100 Manual - Manual for configuring
the 5100 Countdown controller.
Technical Documents
Auto Door Closer
- Detailed description of how to use Artisan's 438 series timers to
automatically close doors and gates controlled by electrical door opening
systems.
Zero Voltage Switching - A technical
description of the difference between zero voltage switching and random
voltage switching on solid state AC timer outputs and their recommended
applications.
Switching Inductive Loads - (new)
A technical description of the cause and recommended suppression
techniques for transients and noise generated from switching inductive
loads
UL Listings - Complete listing of
all Artisan UL listed products.
Std Timing Curves - Time
versus resistance charts for standard timing dash numbers.
Product Life Cycling -
Data on long term cycling tests performed on Artisan products.
Online Technical Support
If the information above does
not provides the answers you are looking for, or you are having problems
with one of our products in your application, download the PDF file below.
Fill the out the form (you can save this form) and email it to support@artisancontrols.com.
Please provide a detailed description and attach any documents you feel
are necessary. We will respond to your Technical Support Request within
24-48 hours.
Technical
Support Form
|
